Posted in

What tools are used for finishing OA sheet metal parts?

Hey there! If you’re reading this, you’re probably someone in the OA equipment game—whether you’re a design engineer sourcing sheet metal parts, a production manager sorting out finishing workflows, or just a guy who’s tired of parts coming off the press with burrs or a rough finish that doesn’t hold up. Let me cut to the chase: finishing OA sheet metal parts isn’t just a “nice-to-have” for us suppliers. It’s the final step that turns a raw metal blank into a part that fits perfectly on a printer, copier, or fax machine, looks clean enough for the front office, and lasts through 100,000+ cycles of opening a document feeder or sliding a paper tray. As someone who’s been supplying OA sheet metal parts for over a decade, I’ve seen way too many projects go sideways because someone skipped the right finishing tools, so let’s break down the stuff we actually use every day. OA Equipment Sheet Metal Parts

First off, let’s get one thing straight: OA parts have unique finishing needs that differ from, say, automotive or construction sheet metal. Most office equipment parts are thin-gauge steel or aluminum—usually 0.5mm to 2mm thick—so we can’t throw super heavy-duty tools at them that’ll warp the metal. We also don’t want a finish that chips the second a new admin slams a paper tray shut. And let’s not forget aesthetics: no one wants a burr catching a sheet of paper, or a rough spot that leaves a scratch on a glossy document.

Let’s start with the basics that every part touches before moving on. Deburring tools. This isn’t the fancy stuff, but it’s non-negotiable. When you cut sheet metal with a CNC laser or punch press, you get tiny, sharp burrs on the edges—those are a disaster for OA parts. A burr on a paper tray edge will shred paper when it slides, and a burr on a feeder hinge will cause misfeeds. What do we use here? First, manual deburring tools—those little handheld carbide blades with a V-shaped edge. We run every part’s edges through these right off the press; it’s fast, cheap, and lets us get into tight corners that automated tools can miss. But for high-volume runs, we use vibratory deburring machines. We load parts into a tub with ceramic media (not the cheap plastic stuff) and run them for 15 to 30 minutes. The media tumbles against the metal, smoothing burrs evenly across hundreds of parts at once. We also throw in a little alkaline cleaner with the media here—kills two birds with one stone: deburr and clean off the oil residue from the stamping process. Pro tip: we size the media to match the part’s gaps; too big and it won’t fit, too small and it’ll get stuck in small holes. No one has time to fish media out of a toner cartridge bracket.

Next up, surface preparation. You can’t just paint or powder-coat a raw metal part and expect it to stick—for OA parts, adhesion is everything. If the finish peels off, you’ve got a part that looks garbage and will fail in six months. We use two main tools here. First, acid pickling tanks for steel parts, but wait—we don’t use the harsh, fuming stuff you might see in factories. We use a mild phosphoric acid solution at 140°F, which strips the mill scale and oil without warping thin sheet. For aluminum parts, which are super common for lightweight OA components, we do alkaline degreasing first, then a chromate conversion coating (not the toxic hexavalent kind—we use trivalent, which meets office equipment environmental standards). But the tool I swear by for light prep is the sandblaster—only with glass beads, not sharp sand. Sharp sand will etch the metal too deep and leave a rough texture that traps dust; glass beads give a uniform, matte texture that’s perfect for adhesion. We use a portable cabinet sandblaster for small runs and a automated blast system for mass production. It’s way more consistent than wiping parts down with rags—no missed spots, no streaks.

Now, the finishing coats—this is where OA parts really shine, or fall flat. Let’s start with powder coating, which is 90% of what we use for our parts. It’s durable, comes in tons of colors (most offices go for white, black, or light gray), and doesn’t chip easy. What tools do we use here? First, electrostatic powder spray guns. These charge the powder particles, so they stick evenly to the metal surface—no overspray, which saves us money and keeps the shop clean. We use both manual guns for custom parts and automated robotic guns for high-volume runs, like the side panels for a line of laser printers. We cure the parts in a convection oven at 375°F for 12 minutes, which gives the powder a smooth, hard finish that passes the “eraser test” (rub an eraser hard on the part—no powder comes off). But wait, there’s a catch: some small parts, like the tabs for a document feeder, are too small to hang on racks for powder coating. So we use dip coating for those. It’s simpler than it sounds: dip the part in a liquid polymer, let it drip off, and cure it. It covers every nook and cranny, so no sharp edges are left exposed, and it’s perfect for tiny OA components that don’t need a high-gloss finish.

For parts that need a more premium look—like the top covers of high-end copiers, which are often glossy black or white—we use wet spray painting. But not the old school air spray; we use HVLP (High Volume Low Pressure) spray guns. They use less air, so less overspray, and the finish is way smoother. We also use a spray booth with filtered air, so dust doesn’t get caught in the wet paint—nothing kills a good part like a tiny dust speck on the top cover. We bake these parts at 250°F for 20 minutes, which makes the paint hard and resistant to scratches from office chairs or paper clips.

Wait, let’s not forget about specialty finishes for specific OA parts. Some parts, like the internal brackets for power supplies, need to be corrosion-resistant. For those, we use zinc plating. The tool here is a barrel plating machine—we load the small brackets into a spinning barrel with zinc anodes, and the part gets a thin zinc coating that prevents rust. It’s cheap, fast, and perfect for small parts that don’t need a big, expensive finish. For parts that need to slide easily—like the paper tray rails—we use a dry film lubricant finish. We spray a Teflon-based coating on the rails, bake it, and it creates a super-smooth surface that paper slides on without jamming. We tested this once with a competitor’s part that used a regular powder coat; it jammed every 10 sheets. Our Teflon-lubed rails? They work for 10,000 sheets straight. That’s the stuff that makes us stand out as a supplier.

Now, let’s talk quality check tools. Even the best part can get messed up at the last minute. We use thickness gauges for the powder coat or paint—make sure it’s between 20 and 80 microns for OA parts; too thin and it chips, too thick and it cracks when you bend the part. We also use edge fillet gauges to make sure all the edges are smooth and no burrs are left—we once had a customer reject a shipment because a tiny burr caught a paper and jammed a new copier during installation. Oops. And we do adhesion tests by taping a piece of duct tape to the part and pulling it off—if any finish comes with the tape, we send it back. Simple, but effective.

I know what some of you are thinking: “This sounds like a lot of tools. Why not just outsource finishing?” Let me tell you, as a supplier, doing finishing in-house is way better for OA parts. Outsourced shops often work with larger parts—like car bumpers—and don’t have the control we need for thin-gauge sheet metal. They might blast too hard and warp a paper tray, or cure the powder at the wrong temperature and get a bubbled finish. When we do finishing in-house, we can tweak every step to fit exactly what OA equipment needs. For example, we recently had a client designing a new all-in-one printer that needed a matte gray finish that matched their office’s new furniture. We adjusted the sandblaster pressure, the powder coat color, and the cure time in two days—something an outsourced shop would take two weeks to do.

But here’s the thing: even with all these tools, the best tool is knowing what an OA part actually needs. A paper tray needs a smooth, non-jamming finish; a frame for a scanner needs a durable scratch-resistant coat; a small bracket needs corrosion protection. No two parts are the same, so we don’t use a one-size-fits-all approach. We’ve spent years figuring out which tools work for which parts, and that’s why our clients come back.

If you’re in the market for consistent, high-quality finishing on your OA sheet metal parts, let’s chat. Whether you’re working on a new prototype or ramping up a production run, we’ve got the tools, the experience, and the attention to detail to make sure your parts work as good as they look. No runarounds, no last-minute surprises—just parts that fit your equipment, hold up to daily office use, and meet your timelines. Shoot us a message to get started, and we’ll walk you through every step of the finishing process for your specific parts.

CNC Turn Mill Parts References:

  1. "Finishing of Sheet Metal Parts for Office Equipment", Journal of Manufacturing Processes, Vol. 28, No. 2, 2017, pp. 412-418.
  2. Electrostatic Powder Coating: Best Practices for Thin-Gauge Steel, Society of Manufacturing Engineers, 2020.
  3. "Surface Preparation for Aluminum Components in Office Automation", Proceedings of the International Conference on Sheet Metal Processing, 2019, pp. 156-161.

Suzhou Yehe Precision Stamping Co., Ltd.
With abundant experience, we are one of the most reliable oa equipment sheet metal parts manufacturers and suppliers in China. We warmly welcome you to buy customized oa equipment sheet metal parts at competitive price from our factory. If you have any enquiry about quotation, please feel free to email us.
Address: No.5, Beifang Road, Changshu City, Suzhou, Jiangsu Province, China.
E-mail: szyh06@yehejingmi.com
WebSite: https://www.yehe-precision.com/