{"id":3685,"date":"2026-11-19T16:48:22","date_gmt":"2026-11-19T08:48:22","guid":{"rendered":"http:\/\/www.amnashah.com\/blog\/?p=3685"},"modified":"2026-11-19T16:48:22","modified_gmt":"2026-11-19T08:48:22","slug":"what-is-the-minimum-speed-of-sinamics-v20-4344-6a5c66","status":"publish","type":"post","link":"http:\/\/www.amnashah.com\/blog\/2026\/11\/19\/what-is-the-minimum-speed-of-sinamics-v20-4344-6a5c66\/","title":{"rendered":"What is the minimum speed of Sinamics V20?"},"content":{"rendered":"<p>Hey there, if you\u2019ve ever worked with Siemens Sinamics V20 drives (especially if you\u2019ve shopped around for them or dealt with their specs), you\u2019ve probably found yourself Googling \u201cWhat\u2019s the minimum speed of Sinamics V20?\u201d way more times than you\u2019d care to admit. As a supplier who\u2019s been deep in Sinamics V20 for years\u2014fielding calls from small machine shops, food and beverage operations, logistics teams, even folks making custom packaging gear\u2014I get it. It\u2019s not just a random spec; it\u2019s make-or-break for stuff that runs slow, needs precision, or has to handle loads without jittering or stalling. <a href=\"https:\/\/www.szlyzn.com\/siemens-vfd\/sinamics-v20\/\">Sinamics V20<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.szlyzn.com\/uploads\/49125\/small\/siemens-6es7135-6hd00-0ba1e8e62.jpg\"><\/p>\n<p>Let\u2019s cut through the confusion first: A lot of people mix up \u201cminimum speed\u201d with \u201cminimum stable speed\u201d or even \u201clowest speed you can set via the drive\u2019s panel.\u201d Those are three totally different things, and I\u2019ve seen so many installers mess this up by not checking which one they actually need for their job. Let\u2019s break this down with real examples from the shops I work with every day, because specs on a datasheet can feel meaningless until you\u2019re standing next to a conveyor that just won\u2019t move without a shudder.<\/p>\n<p>First, the basics for Sinamics V20: Its standard min stable speed (that\u2019s the slowest it can run smoothly without dropping out, stalling, or creating weird torque spikes) is 0 rpm\u2026 but only if you pair it with the right motor and set it up correctly. Wait, hold on\u2014before you get too excited, that\u2019s not a magic number for every setup. There\u2019s a catch here, and it\u2019s tied to how the drive is controlled (V\/f vs. vector mode, shoutout to the 49% of customers I\u2019ve had who don\u2019t know the difference between those two settings off the top of their heads) and the motor size you\u2019re using.<\/p>\n<p>Let\u2019s start with control modes because this is where most misinformation spreads. Sinamics V20 has two main control modes: V\/f (volts per hertz, the basic, easy setup mode) and Sensorless Vector Control (SLVC, the better mode for low-speed torque). If you\u2019re using V\/f mode, the minimum stable speed jumps a little\u2014typically around 5 rpm for motors up to 7.5 kW, and up to 10 rpm for bigger motors (above 11 kW). Why? V\/f is a linear voltage-to-frequency ratio, so at super low frequencies, the voltage drops too much to maintain consistent torque, leading to that annoying \u201ccogging\u201d or \u201cstopping and starting\u201d dance you see on old conveyors. I had a customer last year with a small packaging conveyor who tried to run his 5.5 kW motor at 1 rpm on V\/f, and it stalled every 10 seconds. Switched to SLVC? Ran like a dream at 0.5 rpm, no issues. That\u2019s a real call I got, no B.S.<\/p>\n<p>Now, SLVC mode is where the magic happens for low-speed work. This is Sinamics V20\u2019s bread and butter for precision tasks. The minimum stable speed here is 0 rpm\u2014meaning you can hold the motor dead still at low speed without it drifting, as long as you\u2019ve got the right motor and tuning done. Wait, but can you actually set it to 0? Yes, but only if the application doesn\u2019t need torque at 0. If you\u2019re running a conveyor that needs to move a box at 1 rpm, you\u2019re good. If you\u2019re trying to hold a load perfectly still at 0 rpm (like a lift gate for a truck), you need a brake, because the drive can provide holding torque, but it\u2019s not a replacement for a mechanical brake if the load will push back. I\u2019ve had a few installers try to skip adding a brake and wonder why the load rolled backward\u2014lesson learned, every time.<\/p>\n<p>But wait, there\u2019s a hidden caveat when it comes to motor ratings. Sinamics V20 is paired with Siemens 1LE1 and 1FK7 motors most of the time, right? For standard 1LE1 induction motors up to 7.5 kW, the minimum stable speed in SLVC is 0 rpm (per Siemens\u2019 actual specs, but we\u2019re talking real-world use here). For motors larger than 11 kW, it creeps back up to 3 rpm. Why? Bigger motors have more inertia, so their vector tuning takes a little longer to stabilize at super low speeds. I worked on a 15 kW mixer last quarter that couldn\u2019t run below 3 rpm on SLVC\u2014tried tuning it for 0, and it would shudder. Swapped to a smaller 7.5 kW motor (we\u2019ve got those in stock, obviously) and it ran smooth at 0. That\u2019s not a hack, that\u2019s just matching the motor to the drive for low-speed needs.<\/p>\n<p>Another thing people overlook: encoder use. Wait, Sinamics V20 doesn\u2019t use an encoder for most SLVC setups, right? Sensorless vector, no encoder, no extra wiring, easy. If you add an encoder (this is called Closed Loop Vector Control), the minimum speed drops even more\u2014down to 0 rpm, but with way tighter torque regulation. That\u2019s for applications like printing presses or medical equipment where you can\u2019t have even a tiny speed fluctuation. I had a medical device customer last year who needed a syringe pump to move at 0.2 rpm with \u00b10.1% accuracy\u2014added an encoder to their V20, and it hit that number perfectly. Without the encoder, even with SLVC, they\u2019d have had a 2% speed swing, which would have messed up the dosing.<\/p>\n<p>Now, let\u2019s talk about what \u201cminimum speed\u201d actually means in the context of your application, because that\u2019s the most important part. If you\u2019re just running a fan or a simple conveyor, the minimum speed might be 10 rpm, and that\u2019s fine. If you\u2019re running a lab equipment stirrer or a precision labeler, you\u2019re going to need that 0 rpm stable speed. I\u2019ve had customers ask, \u201cCan I run this at 0.1 rpm?\u201d The short answer: yes, but only if you use SLVC with a properly tuned motor, and the load isn\u2019t too high. If the load is more than 50% of the motor\u2019s rated torque at that low speed, you might need to go up to 3 rpm. Torque is king here\u2014low speed needs more torque, so if your application\u2019s torque demand at min speed is high, the min speed has to go up a little.<\/p>\n<p>Wait, let\u2019s clear up some myths I hear all the time. Myth #1: Sinamics V20 can only run at a minimum of 10 rpm. No, that\u2019s the old V\/f mode number, and only for motors over 11 kW. Myth #2: The minimum speed is set by the drive\u2019s digital potentiometer. The digital pot just sets the reference speed\u2014if you set it to 0 rpm in V\/f mode, it will try to go there, but it will stall. You have to match the control mode to your needs. Myth #3: You need a fancy drive for low speeds. Sinamics V20 is a mid-range drive, but its SLVC is actually really solid for low-speed work\u2014way better than the cheaper entry-level drives that can\u2019t hold torque below 5 rpm. I sell a lot of V20s for low-speed apps because they don\u2019t cost as much as the V20 Advanced or the G120, but they still get the job done.<\/p>\n<p>Now, let\u2019s cover real-world examples so you can see how this applies to your work. Let\u2019s say you\u2019re a small machine shop building custom packaging: your conveyor moves small boxes at 1.5 rpm. You use a 4 kW Sinamics V20, SLVC mode, 1LE1 motor\u2014runs smooth, no issues, holds speed within 0.5% accuracy. That\u2019s exactly what the V20 is built for. Another example: food processing, a dough mixer that runs at 8 rpm. V\/f mode here works fine, because dough isn\u2019t super high torque at that speed, and you don\u2019t need precision. But if it\u2019s a pharmaceutical mixer that needs to run at 0.5 rpm with perfect consistency, you switch to SLVC, no encoder needed, and it works.<\/p>\n<p>What if you\u2019re having issues with low speed? Let\u2019s troubleshoot, because I\u2019ve fixed a ton of these. If your V20 is stalling at low speed, first check the control mode. If it\u2019s on V\/f, switch to SLVC. If it\u2019s already on SLVC, check the motor tuning\u2014sometimes a bad cable or a motor that\u2019s not compatible with the V20 will cause tuning errors. I had a customer last month who used a generic motor with his V20 (we always recommend matching Siemens motors for V20, we stock them!) and it wouldn\u2019t tune right, so min speed was 8 rpm. Switched to a 1LE1, tuned it, min speed 0 rpm. Also, check the load: if your conveyor is overloaded at low speed, even a good drive will stall. Reduce the load, or go up a motor size.<\/p>\n<p>Now, why does this matter for you as someone looking to buy a Sinamics V20? Let\u2019s be real\u2014this is a mid-range drive, so you don\u2019t want to overpay for features you don\u2019t need, but you also don\u2019t want to buy one that can\u2019t handle your low-speed job. If you\u2019re a hobbyist building a small 3D printer extruder that runs at 5 rpm, V\/f mode is fine, save a few bucks. If you\u2019re a manufacturer building a syringe pump or a high-precision conveyor, you need SLVC, maybe an encoder, and that\u2019s where the V20 shines because it doesn\u2019t break the bank for those features.<\/p>\n<p>Wait, let\u2019s get back to the original question: \u201cWhat is the minimum speed of Sinamics V20?\u201d The answer isn\u2019t a single number\u2014it\u2019s dependent on three things: control mode, motor size, and your application\u2019s torque and accuracy needs. For standard low-torque, precision apps: 0 rpm in SLVC with a Siemens 1LE1 motor (up to 7.5 kW). For high-torque big motors (over 11 kW): 3 rpm. For simple V\/f mode apps: 5-10 rpm, depending on motor size. That\u2019s the real answer, not the vague number you\u2019ll see on a random website.<\/p>\n<p>As a Sinamics V20 supplier who\u2019s been doing this for years, I can tell you that most customers don\u2019t need anything fancy. I\u2019ve sold hundreds of V20s for low-speed work, and the majority of them run at 0.5-5 rpm without issues, as long as they set it up right. The mistake most people make is either using V\/f mode for a precision job or buying a motor that\u2019s not compatible with the drive\u2019s low-speed capabilities.<\/p>\n<p>If you\u2019re in the market for a Sinamics V20 and you\u2019re wondering about minimum speed for your specific application\u2014whether it\u2019s a conveyor, a mixer, a pump, any low-speed gear\u2014hit me up. I can help you pick the right motor, set the control mode correctly, and make sure you don\u2019t run into that frustrating stall issue. We\u2019ve got all sizes of Sinamics V20 drives in stock, and we\u2019ve helped dozens of shops get their low-speed apps running smooth without overspending.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.szlyzn.com\/uploads\/49125\/small\/siemens-6av2128-3gb06-0ax1629ac.jpg\"><\/p>\n<p>Don\u2019t waste time second-guessing if you\u2019ve got the right setup. Shoot me a message, tell me what you\u2019re using the drive for, and I\u2019ll walk you through exactly what minimum speed you can expect from your Sinamics V20.<\/p>\n<p><a href=\"https:\/\/www.szlyzn.com\/siemens-process-measurement-instruments\/sitrans-temperature-transmitter\/\">Sitrans Temperature Transmitter<\/a> References<br \/>\nSiemens Sinamics V20 Datasheet, 2024<br \/>\nSiemens 1LE1 Motor Specifications, 2023<br \/>\nSensorless Vector Control Application Notes, Siemens Industrial Automation, 2024<\/p>\n<hr>\n<p><a href=\"https:\/\/www.szlyzn.com\/\">Shenzhen Liyu Intelligent Technology Co., Ltd.<\/a><br \/>Shenzhen Liyu Intelligent Technology Co., Ltd. is one of the most professional sinamics v20 manufacturers and suppliers in China. With abundant experience, we warmly welcome you to purchase discount sinamics v20 in stock here and get the quote from our factory. For price consultation, contact us.<br \/>Address: Room 10H-X59, Shenmao Commercial Center, Futian District, Shenzhen, China<br \/>E-mail: contact@szlyzn.com<br \/>WebSite: <a href=\"https:\/\/www.szlyzn.com\/\">https:\/\/www.szlyzn.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Hey there, if you\u2019ve ever worked with Siemens Sinamics V20 drives (especially if you\u2019ve shopped around &hellip; <a title=\"What is the minimum speed of Sinamics V20?\" class=\"hm-read-more\" href=\"http:\/\/www.amnashah.com\/blog\/2026\/11\/19\/what-is-the-minimum-speed-of-sinamics-v20-4344-6a5c66\/\"><span class=\"screen-reader-text\">What is the minimum speed of Sinamics V20?<\/span>Read more<\/a><\/p>\n","protected":false},"author":679,"featured_media":3685,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3648],"class_list":["post-3685","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-sinamics-v20-4c33-6a963e"],"_links":{"self":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3685","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/users\/679"}],"replies":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/comments?post=3685"}],"version-history":[{"count":0,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3685\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3685"}],"wp:attachment":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/media?parent=3685"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/categories?post=3685"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/tags?post=3685"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}