{"id":3620,"date":"2026-11-12T09:34:59","date_gmt":"2026-11-12T01:34:59","guid":{"rendered":"http:\/\/www.amnashah.com\/blog\/?p=3620"},"modified":"2026-11-12T09:34:59","modified_gmt":"2026-11-12T01:34:59","slug":"how-to-demagnetize-a-solenoid-coil-4a7f-3504e6","status":"publish","type":"post","link":"http:\/\/www.amnashah.com\/blog\/2026\/11\/12\/how-to-demagnetize-a-solenoid-coil-4a7f-3504e6\/","title":{"rendered":"How to demagnetize a solenoid coil?"},"content":{"rendered":"<p>As a solenoid coil supplier who\u2019s been in the game for over a decade, I\u2019ve fielded hundreds of questions from engineers, machinists, and even hobbyists asking one specific thing: \u201cHow do I demagnetize a solenoid coil correctly?\u201d It\u2019s a common headache, and wrong methods can ruin a perfectly good coil, or even lead to safety issues if you\u2019re working with high-powered units. Let\u2019s break this down the way I teach my customers, mixing real-world experience with the science that makes demagnetization work. <a href=\"https:\/\/www.irriga-systems.com\/hydraulic-control-valve-solenoid\/solenoid-coil\/\">Solenoid Coil<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.irriga-systems.com\/uploads\/45145\/small\/pvc-butterfly-valveaf5df.jpg\"><\/p>\n<p>First, let\u2019s get clear on why a solenoid coil gets magnetized in the first place. When you run an electric current through a solenoid coil, that coiled wire generates a uniform magnetic field\u2014its whole job, really. But when you shut off the current, a small residual magnetism often lingers. That\u2019s called coercivity, and it\u2019s the tiny amount of magnetic field that remains in the coil\u2019s core (usually made of soft iron or steel) after the external current stops. For most applications, this residual magnetism is nothing to worry about. But if you\u2019re assembling parts around the solenoid\u2014like small springs, plastic guides, or even adjacent electronic components\u2014extra magnetism can throw off alignment, cause friction in moving parts, or even interfere with nearby sensors. I\u2019ve seen a customer\u2019s entire assembly line shut down because residual magnetism in solenoid cores was sticking tiny metal debris to a critical sliding mechanism, costing them thousands in downtime before they fixed the issue.<\/p>\n<p>Demagnetization, or degaussing, is the process of removing that residual magnetism. It\u2019s not just \u201cwaving a magnet at it and hoping for the best\u201d\u2014there are right and wrong ways to do this, depending on your coil\u2019s size, power rating, and how precise you need to be. Let\u2019s start with the basics of how degaussing works, to avoid guessing. Magnetism, at its core, is about the alignment of magnetic domains in a material. Every piece of iron (or steel) has tiny, invisible regions called domains, each acting like a mini magnet. When you magnetize a material, all those domains line up in the same direction, creating a net magnetic field. To demagnetize, you need to randomize those domains so their individual magnetic fields cancel each other out. The most common way to do that is to expose the material to a decreasing alternating magnetic field\u2014this is why most industrial degaussers work the way they do.<\/p>\n<p>Now, let\u2019s go through the practical methods, starting with the ones I recommend most, paired with when to use each, based on the coils I supply:<\/p>\n<ol>\n<li>\n<p>AC Degaussing (The Industrial Standard)<br \/>\nThis is the method I swear by for most production or large solenoid coils\u2014think the ones we make for industrial valves, packaging machinery, or hydraulic systems. Here\u2019s how it works, step by step. First, you need an AC degausser (sometimes called a demagnetizer) rated for the size of your coil. Most degaussers work by generating a strong alternating magnetic field that you bring the coil into, then slowly move it away. The alternating field flips the domains back and forth, and as you move the coil farther from the degausser, the strength of the field decreases, until eventually the domains are random and there\u2019s no net magnetism left.<br \/>\nImportant tips I\u2019ve picked up from years of working with customers: Don\u2019t just turn the degausser on, hold the coil for a second, and turn it off. That can leave residual magnetism from the sudden stop. Instead, hold the coil within 1 to 2 inches of the degausser\u2019s core for 2 to 3 seconds, then slowly pull it away at a steady rate\u2014about 1 foot per second is standard. Once it\u2019s 3 feet or more away, turn the degausser off. That ensures the field is weak enough that it doesn\u2019t re-magnetize the coil when you turn the machine off.<br \/>\nFor large solenoid coils (like the 12-inch ones we make for heavy equipment), you can also use a coil of wire connected to a variable AC power supply. Pass alternating current through the wire, starting at a high amperage (enough to create a field stronger than the coil\u2019s residual magnetism) and slowly turn the amperage down to zero. This is a cheaper alternative if you don\u2019t have an industrial degausser on hand, and it works just as well for larger coils. The key here is to reduce the current gradually\u2014if you cut it off suddenly, the domains won\u2019t have time to randomize.<\/p>\n<\/li>\n<li>\n<p>Passive Demagnetization (For Small, Low-Power Coils)<br \/>\nIf you\u2019re working with tiny solenoid coils\u2014like the ones used in door locks, small switches, or consumer electronics\u2014you might not need an AC degausser. A simple passive method works here: leave the coil in a \u201cdemagnetizing environment\u201d for several hours, or even days. Soft magnetic materials (like the steel we use for our coil cores) have low coercivity, meaning they\u2019ll lose residual magnetism over time when no external magnetic field is applied. But this only works for coils that have very small residual magnetism. If your coil was exposed to a strong magnetic field, this method could take weeks, so it\u2019s not ideal for production.<br \/>\nAnother passive trick: heat the coil. Magnetic materials lose their magnetism when heated above their Curie temperature\u2014for iron, that\u2019s about 770\u00b0C (1420\u00b0F). That\u2019s a high temperature, obviously, so this is only for coils where you can safely run them through an oven or heat treatment. For small coils, you can also heat them with a blowtorch (carefully, to avoid damaging the insulation on the wire) until they glow dull red, then let them cool slowly in a non-magnetic material (like ceramic or wood). This will fully randomize the domains, demagnetizing the coil completely. But again, this is a last resort\u2014if you have delicate components attached to the coil, the heat can damage wiring or seals.<\/p>\n<\/li>\n<li>\n<p>DC Degaussing (For Precision Applications)<br \/>\nIf you\u2019re working with high-precision solenoid coils, like the ones used in medical devices or aerospace components, DC degaussing is a great option. It\u2019s more controllable than AC methods, which is key when you can\u2019t risk over-demagnetizing (yes, that\u2019s a thing!) or leaving behind a small residual field. How it works: connect the coil to a variable DC power supply, set the current to a level that creates a magnetic field slightly stronger than the coil\u2019s current residual magnetism (you can test this with a gaussmeter, which measures magnetic field strength), then slowly reduce the current to zero. It\u2019s similar to the large-coil AC method, but uses direct current instead, which gives you more control. I recommend this for customers making components where even a 1 Gauss magnetic field can cause issues\u2014like sensors that detect tiny metal parts.<\/p>\n<\/li>\n<\/ol>\n<p>Now, let\u2019s talk about the mistakes I see people make all the time, especially with the coils we supply. First, using a permanent magnet to \u201cwipe\u201d residual magnetism. I\u2019ve had a customer show up with a solenoid coil that was way more magnetized than before, because he tried waving a bar magnet at it to erase the magnetism. That\u2019s the exact opposite of what you want\u2014you\u2019re just aligning all the domains in the opposite direction, leaving the coil twice as magnetic as before. Second, cutting power too quickly, as I mentioned earlier. I\u2019ve had customers turn off a degausser mid-process, which left their coils with a 20 Gauss field instead of near-zero. Third, not testing after demagnetization. It\u2019s easy to assume it worked, but using a cheap gaussmeter (even a $50 one works for most applications) to test the coil after you\u2019re done can save you a lot of headaches. If the field is still above 5 Gauss (the threshold for most general applications), just repeat the process\u2014usually one more pass is enough.<\/p>\n<p>Another big question: can demagnetization damage a solenoid coil? The short answer is, if you do it right, no. But if you use too high a current, or heat it too much, you can damage the wire insulation, bend the core, or even break the coil\u2019s windings. That\u2019s why I always recommend matching the method to your coil\u2019s specs. For example, if you have a 24V solenoid coil rated for 2 amps, don\u2019t hook it up to a 10A power supply for degaussing\u2014you\u2019ll burn out the wire insulation. For AC degaussers, always check the machine\u2019s power rating to make sure it\u2019s compatible with your coil\u2019s size and current draw.<\/p>\n<p>Now, let\u2019s tie this back to what we do as a solenoid coil supplier. We test every coil we ship for residual magnetism, but we know some customers need to go the extra step. That\u2019s why we often send a quick guide with our coils, outlining which demagnetization method works best for the models we produce. For example, our standard 12V industrial valve coils work great with the AC degaussing method, while our small 5V door lock coils are perfect for passive or low-current DC degaussing. If you\u2019re not sure which method is right for your application, our team can walk you through it\u2014we\u2019ve helped hundreds of customers troubleshoot demagnetization issues over the years.<\/p>\n<p>Let\u2019s also cover a quick troubleshooting tip if demagnetization isn\u2019t working. If you\u2019ve tried the AC method and the coil still has magnetism, check if the degausser is working properly\u2014sometimes they lose power over time, or the cord has a break. Also, make sure you\u2019re not holding the coil too close to metal tables or tools while you\u2019re working\u2014external metal can interfere with the magnetic field, making the demagnetization process less effective. If you\u2019re using the DC method and it\u2019s not working, double-check your current reduction rate\u2014if you turn the current down too fast, the domains won\u2019t randomize, just like with AC.<\/p>\n<p>I can\u2019t tell you how many times a customer has come to us saying their solenoid is acting up, turns out residual magnetism is the root cause. Once, a customer in the aerospace industry was complaining that their solenoid-activated valves were sticking during testing, and they thought the coils were defective. When we tested the coils, they had a 35 Gauss residual field\u2014enough to pull the valve\u2019s metal components slightly off alignment. We walked them through the AC degaussing method, and after they did it, the valves worked perfectly. They ended up ordering 500 replacement coils from us because they trusted our process after that.<\/p>\n<p>At the end of the day, demagnetizing a solenoid coil isn\u2019t rocket science, but it does require a little care to get it right. The key is to match the method to your coil\u2019s size and application, avoid the common mistakes, and always test after you\u2019re done. If you\u2019re a manufacturer working on a project, or a hobbyist building a custom device, and you\u2019re not sure what you need, don\u2019t hesitate to reach out to our team to discuss your requirements. We\u2019re here to help you get the most out of your solenoid coils, whether that\u2019s picking the right coil for your project or troubleshooting any issues you run into along the way.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.irriga-systems.com\/uploads\/45145\/small\/butterfly-micro-sprinkler93aaa.jpg\"><\/p>\n<p>Whether you\u2019re dealing with a tiny consumer coil or a large industrial unit, taking the time to demagnetize it correctly will save you downtime, reduce defects, and make your final product work better. It\u2019s a small step, but it\u2019s one that makes a big difference, and it\u2019s something every solenoid user should know how to do. If you\u2019re ready to discuss your solenoid coil needs, or have questions about demagnetization for a specific model, our team is here to help with your purchasing and technical questions.<\/p>\n<p><a href=\"https:\/\/www.irriga-systems.com\/quick-coupling-value\/\">Quick Coupling Valve<\/a> References<\/p>\n<ol>\n<li>Cullity, B. D., &amp; Graham, C. D. (2008). Introduction to Magnetic Materials. IEEE Press.<\/li>\n<li>\u201cDemagnetization Basics for Magnetic Materials.\u201d Magnetic Materials Association Technical Bulletin, 2021.<\/li>\n<li>Industrial Solenoid Coil Design and Application Guide. Solenoid Industry Standards Council, 2022.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.irriga-systems.com\/\">Xiamen Superb Technology Co., Ltd.<\/a><br \/>Xiamen Superb Technology Co., Ltd. is well-known as one of the leading solenoid coil manufacturers and suppliers in China. With a professional production team, we are able to meet the needs of the majority of our customers. Please rest assured to wholesale high quality solenoid coil from our factory.<br \/>Address: 1-2F, 1 Building, Xinyongsheng Industry Garden Dianqian, Huli District, Xiamen, China<br \/>E-mail: mike@irriga-systems.com<br \/>WebSite: <a href=\"https:\/\/www.irriga-systems.com\/\">https:\/\/www.irriga-systems.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>As a solenoid coil supplier who\u2019s been in the game for over a decade, I\u2019ve fielded &hellip; <a title=\"How to demagnetize a solenoid coil?\" class=\"hm-read-more\" href=\"http:\/\/www.amnashah.com\/blog\/2026\/11\/12\/how-to-demagnetize-a-solenoid-coil-4a7f-3504e6\/\"><span class=\"screen-reader-text\">How to demagnetize a solenoid coil?<\/span>Read more<\/a><\/p>\n","protected":false},"author":343,"featured_media":3620,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3583],"class_list":["post-3620","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-solenoid-coil-4224-3537b9"],"_links":{"self":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3620","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/users\/343"}],"replies":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/comments?post=3620"}],"version-history":[{"count":0,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3620\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3620"}],"wp:attachment":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/media?parent=3620"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/categories?post=3620"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/tags?post=3620"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}