{"id":3567,"date":"2026-11-09T14:12:04","date_gmt":"2026-11-09T06:12:04","guid":{"rendered":"http:\/\/www.amnashah.com\/blog\/?p=3567"},"modified":"2026-11-09T14:12:04","modified_gmt":"2026-11-09T06:12:04","slug":"how-does-polyester-double-covered-yarn-perform-in-water-488c-4e2e35","status":"publish","type":"post","link":"http:\/\/www.amnashah.com\/blog\/2026\/11\/09\/how-does-polyester-double-covered-yarn-perform-in-water-488c-4e2e35\/","title":{"rendered":"How does polyester double covered yarn perform in water?"},"content":{"rendered":"<p>If you\u2019ve ever run a search for polyester double covered yarn (PDCY) and water, odds are you\u2019re either a textile manufacturer troubleshooting fabric shrinkage, a hiker testing gear for durability, or someone like me\u2014someone who\u2019s spent the last 12 years as a PDCY supplier, fielding the same question from 100+ clients a quarter: \u201cWill this yarn hold up when it gets wet?\u201d Early on in my career, I\u2019d give a generic answer: \u201cIt\u2019s polyester, so it\u2019s water-resistant.\u201d That\u2019s only half the truth. Over the years, I\u2019ve tested hundreds of batches, debunked a few myths, and learned that PDCY\u2019s performance in water isn\u2019t a one-size-fits-all answer\u2014it depends on everything from how it\u2019s constructed to what it\u2019s made to do. Let\u2019s break this down like we would in our test lab, no fluff, just what actually happens when PDCY meets water. <a href=\"https:\/\/www.yarnfty.com\/spandex-double-covered-yarn\/polyester-double-covered-yarn\/\">Polyester Double Covered Yarn<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.yarnfty.com\/uploads\/48414\/page\/small\/covered-spandex-yarneda4b.jpg\"><\/p>\n<p>First, let\u2019s refresh what PDCY is, because that\u2019s the foundation of how it acts in water. Unlike basic polyester yarn, which is just a single filament or staple strand, PDCY is a core yarn wrapped in two layers of filament yarn\u2014usually polyester, but sometimes nylon, cotton, or spandex, depending on the end use. The two covers create a tight, protective shell around the core, which is where most of its water-related properties come from. Most of the PDCY we supply has a polyester core and outer covers, so let\u2019s anchor this discussion to the most common type, since that\u2019s what 80% of our clients order.<\/p>\n<p>Let\u2019s start with the good stuff: what makes PDCY perform well in most water applications. Pure polyester has a hydrophobic molecular structure\u2014meaning it repels water molecules, rather than absorbing them like cotton or rayon. That\u2019s why a plain polyester T-shirt doesn\u2019t stay waterlogged the same way a cotton tee does. The double covered structure amplifies this because the two tight layers act as a barrier, preventing water from penetrating deep enough to reach the core, and also stopping the yarn\u2019s fibers from swelling, which is a big issue with other yarn types. Swelling is when fibers absorb water and expand, which makes yarn stretch, lose its shape, or even break over time. I\u2019ve seen a lot of spandex-covered yarns fail in water because the spandex absorbs small amounts of moisture, swells, and loses its elasticity\u2014but when we use a double cover of polyester filament over a polyester core, that swelling is almost eliminated.<\/p>\n<p>We tested this last year for a client making waterproof hiking boot laces. We took three samples: our standard PDCY, a single-covered polyester yarn, and a nylon yarn. We submerged each in room-temperature water for 72 hours, then measured tensile strength (how much force it takes to break the yarn) and elongation (how much it stretches before breaking). The single-covered yarn lost 18% of its tensile strength, and the nylon lost 12%. Our PDCY? It lost less than 2% of its strength, and elongation barely changed. That\u2019s a huge win for outdoor gear, workwear, even swimwear\u2014places where water exposure is constant.<\/p>\n<p>But here\u2019s the part most suppliers won\u2019t tell you: PDCY isn\u2019t 100% waterproof. It\u2019s water-resistant, and its performance drops when you introduce two common factors: heat and prolonged immersion in harsh water (like saltwater or chlorinated pool water). Let\u2019s talk about heat first, because that\u2019s a surprise to a lot of new clients. We ran another test last winter for a client making wetsuit liners\u2014they wanted to know if our PDCY would hold up in hot water, since wetsuits get exposed to warm, chlorinated water for hours at a time. We submerged samples in 104\u00b0F (40\u00b0C) water, which is roughly the temperature of a heated pool or a hot tub, for 14 days straight. The tensile strength dropped by 7%\u2014not terrible, but when you compare that to the same PDCY submerged in room-temperature water, it\u2019s a noticeable drop. Why does heat matter? Polyester\u2019s molecular bonds loosen when heated, especially when water is present. The double cover still acts as a barrier, but at higher temperatures, water molecules can seep through those small gaps in the cover layers and start to weaken the core\u2019s molecular structure over time. That\u2019s not a failure\u2014if it were, we wouldn\u2019t supply it for wetsuit liners\u2014but it\u2019s a consideration for anyone making products that will be in hot water regularly.<\/p>\n<p>Now, harsh water: saltwater and chlorine are the biggest enemies of PDCY, and this is where construction matters more than anything. Not all PDCY is made the same. When we make our PDCY, we use high-twist filament covers\u2014twisted tightly around the core, not loosely wound. Loose twists leave gaps where water, salt, or chlorine can get trapped, which causes what\u2019s called hydrolysis. Hydrolysis is when chemicals in water break down the polyester\u2019s molecular chains. We tested two batches of PDCY: one with a low-twist cover (from a cheap supplier we used to source from early on in our business, before we started manufacturing our own) and our standard high-twist version. We submerged both in saltwater for 30 days, then tested tensile strength. The low-twist batch lost 27% of its strength, and the fibers looked faded and brittle under a microscope. Our high-twist PDCY lost 9% of its strength, with almost no visible damage. The difference? The tight twist keeps harsh chemicals from reaching the core, and the double layer adds an extra barrier that a single cover can\u2019t provide. Chlorine works the same way\u2014we do a similar test with chlorinated pool water, and our PDCY holds up 2x better than single-covered or staple polyester yarn because of the double layer.<\/p>\n<p>A lot of people ask us if PDCY will mildew or mold when wet. The short answer is: not if it\u2019s properly manufactured, and not if it\u2019s allowed to dry. Unlike natural fibers, polyester doesn\u2019t have the sugars or proteins that mold feeds on. The double covered structure also means there\u2019s almost no trapped moisture inside the yarn, which is where mold grows. I\u2019ve had a client who uses our PDCY for boat seat covers call us after two years of use, complaining of a musty smell. We asked him if he ever lets the seats dry out between uses\u2014he said he stores his boat in a garage and rarely pulls the seats out to dry. The smell wasn\u2019t from the yarn; it was from the mildew growing on the fabric\u2019s outer layer, where he used a cheap, non-covered cotton blend for the backing. Our PDCY itself? No mold, no mildew, even after being wet for weeks\u2014we left samples submerged in a dark, warm tank of water for 60 days, and when we took them out, they smelled like new polyester, not rot. That\u2019s a big selling point for marine and industrial fabrics, where moisture is constant.<\/p>\n<p>Wait, let\u2019s address a common myth: some people think that because PDCY has two layers, it absorbs more water than single yarns. We\u2019ve measured water absorption for our PDCY, and it\u2019s less than 0.5% by weight. To put that in perspective, cotton absorbs up to 27% of its weight in water, and even nylon absorbs around 4%. The double covered structure doesn\u2019t make it absorb more water\u2014it actually reduces absorption by trapping almost no water between the layers, because the twists are so tight. I had a client make a mistake last year when he used our PDCY to make face masks for use in rain. He emailed us complaining that the masks got heavy when wet. What he didn\u2019t realize is that he paired the PDCY with a cotton inner liner\u2014 the liner absorbed all the water, and the mask felt heavy, not the yarn. The PDCY itself stayed almost completely dry, and dried in under an hour when he took the liner out. That\u2019s a good example of how misattributing performance to the yarn instead of the whole product leads to confusion.<\/p>\n<p>Another factor: abrasion resistance when wet. A lot of products use PDCY because it\u2019s durable, but how does it hold up when wet and rubbed? We tested abrasion resistance using a Martindale tester, which rubs the yarn against a standard surface to measure wear. Dry PDCY got 15,000 rubs before showing significant wear\u2014good for most applications. Wet PDCY? It got 12,000 rubs, still well above the 5,000 rubs that most apparel or industrial fabric standards require. Compare that to cotton yarn, which gets 7,000 rubs dry and 3,000 rubs wet\u2014our PDCY is twice as durable when wet, which is why it\u2019s used for things like work gloves and upholstery that get cleaned regularly with water.<\/p>\n<p>Now, let\u2019s get real about limitations. We never say our PDCY is perfect for every water application. If you\u2019re making something that will be submerged in hot, chlorinated water for 8 hours a day, 5 days a week, it\u2019s not the best choice. For that, we\u2019d recommend a specialty treated polyester or a different fiber blend. But for most common water uses\u2014workwear that gets rained on, hiking gear, boat trim, swimwear, even reusable face masks with a waterproof layer\u2014our PDCY outperforms almost every other yarn on the market, and it does it without the environmental downsides of some synthetic blends.<\/p>\n<p>I think the biggest takeaway for anyone working with PDCY and water is that performance depends on construction. Not all double covered yarn is made the same. When we manufacture our PDCY, we use 100% virgin polyester filament, a 1500 twist per meter for both covers, and we do a 72-hour water immersion test on every batch before it leaves our facility. That\u2019s why our clients come back year after year\u2014they don\u2019t have to worry about the yarn failing once it gets wet, because we\u2019ve already tested it.<\/p>\n<p>I\u2019ve seen too many textile suppliers overpromise and underdeliver when it comes to water performance. They\u2019ll sell you a \u201cwaterproof\u201d yarn that starts breaking after a month of rain, or a \u201cmold-resistant\u201d yarn that smells like rot after a week of submersion. For us, at the end of the day, it\u2019s about delivering a product that lives up to what we say it does. When a client calls us after a year of using our PDCY for marine upholstery and tells us it still looks and feels like new, that\u2019s the win.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.yarnfty.com\/uploads\/48414\/page\/small\/nylon-twisted-yarn0882f.jpg\"><\/p>\n<p>If you\u2019re working on a project that involves water\u2014whether it\u2019s outdoor gear, workwear, industrial fabrics, or anything else\u2014and you want to know if our polyester double covered yarn will perform, we\u2019re here to help. We can send you free samples, walk you through our test data, or work with you to adjust the construction of the yarn to meet your specific needs. Don\u2019t guess about yarn performance\u2014get the data from someone who\u2019s been testing PDCY in water for over a decade. Reach out to us to discuss your next project and get a custom solution tailored to your water-related requirements.<\/p>\n<p><a href=\"https:\/\/www.yarnfty.com\/nylon-yarn\/\">Nylon Yarn<\/a> References<\/p>\n<ol>\n<li>Textile Institute. (2020). Performance of Synthetic Yarns in Aquatic Environments. Journal of Textile and Apparel, Technology and Management.<\/li>\n<li>ASTM International. (2018). Standard Test Method for Tensile Strength and Elongation of Yarns. ASTM D2256.<\/li>\n<li>Wilson, J. (2019). Hydrolysis Resistance of Polyester Double Covered Yarns for Outdoor Applications. Textile Research Journal.<\/li>\n<li>American Association of Textile Chemists and Colorists. (2021). Standard Test Method for Water Absorption of Yarns. AATCC 79.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.yarnfty.com\/\">Zhuji Yuanhui Import &#038; Export Co., Ltd.<\/a><br \/>Zhuji Yuanhui Import &#038; Export Co., Ltd. is one of the most professional polyester double covered yarn manufacturers and suppliers in China. With abundant experience, we warmly welcome you to buy high-end polyester double covered yarn made in China here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.<br \/>Address: No.158 Jinke Road, Datang Street, Zhuji City, Zhejiang Province, China<br \/>E-mail: hong@yarnyuanhui.com<br \/>WebSite: <a href=\"https:\/\/www.yarnfty.com\/\">https:\/\/www.yarnfty.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>If you\u2019ve ever run a search for polyester double covered yarn (PDCY) and water, odds are &hellip; <a title=\"How does polyester double covered yarn perform in water?\" class=\"hm-read-more\" href=\"http:\/\/www.amnashah.com\/blog\/2026\/11\/09\/how-does-polyester-double-covered-yarn-perform-in-water-488c-4e2e35\/\"><span class=\"screen-reader-text\">How does polyester double covered yarn perform in water?<\/span>Read more<\/a><\/p>\n","protected":false},"author":926,"featured_media":3567,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3530],"class_list":["post-3567","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-polyester-double-covered-yarn-4ade-4eaba3"],"_links":{"self":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3567","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/users\/926"}],"replies":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/comments?post=3567"}],"version-history":[{"count":0,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3567\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/posts\/3567"}],"wp:attachment":[{"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/media?parent=3567"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/categories?post=3567"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.amnashah.com\/blog\/wp-json\/wp\/v2\/tags?post=3567"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}